What Type of Flooring Can You Put Over Ceramic Tiles?

Instead of replacing tiles from the floors, innovative homeowners are now opting for different types of flooring that can be done over the existing tiles. The process doesn’t cost as much as the replacement and looks elegant and stylish at the same time.

If you are reading this article, you are planning to do the same. But do you know what types of flooring you can put over ceramic tile?

Let us help you go through the selection process for different flooring types. Since Ceramics are durable enough, you can go with any floor type.

However, the best-suited options are Vinyl, Hardwood, Laminate, Carpet, Cork, and Epoxy. Stay in this article to gate brief overview of these flooring types.

Which Flooring Type Is Best According To Placement?

Almost every time people look for cost-efficient tiles, ceramic tiles manufactured by high-quality tiles companies in Bangladesh are at the top of the list. And to cover them, you need to think of the pros and cons of the flooring type that will not harm the tiles below.

Each compartment of our house is used for different purposes. It is better to keep that in mind while looking at other options for flooring over ceramic. We have listed different options for you to decide which flooring type will be best for which flooring plan.

1.  Cork:

This flooring is popular these days because of its unique texture and design. Cork tiles are compatible with ceramic tiles and are best suited for kitchen and bathroom flooring as they are highly water-resistant.

Decide if you want to install cork over your ceramic tiles after reading the pros and cons of this flooring type.

Pros:

  • Mostly Water-resistant
  • Does not soak liquid materials
  • Provides soundproofing feature
  • Smooth surface, so gentle on feet
  • Withstand maximum foot traffic

Cons:

  • Not suitable for outdoor flooring as it fades with sunlight
  • Cannot withstand extreme climates (too hot or cold)
  • Not compatible with temperature-controlled flooring

2.  Laminate:

Another popular choice to cover over ceramic is lamination. If your tiles are wearing out and uneven, hardwood or wood laminate flooring should be the perfect match to transform your flooring once again.

You can add laminate flooring at any place you want. But it is better to install where less foot traffic is observed—for example, bedroom, corridor or large living room.

Again, this flooring technique doesn’t need glue and can be easily removed if necessary. If you are a DIY enthusiast and have an old ceramic floor to refurbish, try to laminate the floor, and you will not be disappointed.

Pros:

  • Installation is easier
  • Budget-friendly
  • Aesthetic contrast looks of wood
  • Stain-resistance

Cons:

  • Lower durability than actual hardwood
  • Thin planks are prone to get broken easily
  • Can be damaged after contact with water
  • Sound-absorbing padding is needed to make the floor soundproof

3.  Vinyl

You can only use vinyl flooring if it is tightly sealed, smooth or seamless surface. You will find a good range of vinyl tiles range to choose from. Waterproof vinyl planks and Luxury Vinyl tiles are best for bathroom floors and the kitchen as they have a waterproof core. Geometric patterns, stone and wooden structures and patterns are available in this category that suits your design choice.

Rigid-core vinyl planks that are highly rigid and durable are also available. These tiles types are best for high traffic areas. Moreover, the thin glue-strip planks could be at the top of the list if you are looking for a low-budget option.

The advantage of using glue-strip planks is these are attached to the old tiles by the peel-and-stick strips. So, super easy to install.

Pros:

  • Less expensive than wood
  • Thin planks don’t require you to cut off door length
  • It can be the best option as a temporary floor plan
  • Little to low maintenance
  • Usually environment friendly.

Cons:

  • Repairing not possible
  • VOCs or volatile organic compounds are present
  • Fragile and less durable
  • Removing is troublesome due to adhesives

Adhesives to Use for Installing Ceramic:

The only thing you need to understand is that you need to select the proper glue to install the specific type of flooring. A shortlist is given below:

  • Cork-adhesives for installing cork.
  • Urethane adhesive to install hardwood
  • Padding and glue need to install vinyl
  • No bonds are required for laminate or carpet.

Conclusion:

If you want to avoid removing the old ceramic tiles from your floors, consider installing different flooring types mentioned above. But consult your contractor or engineer before deciding to ensure that you have picked the right flooring type compatible with the ceramic floor. Otherwise, you may destroy the tiles with extra padding and adhesives.

Add a Comment

Your email address will not be published.